Germinating Marijuana Seeds In Jiffy Pots

ILGM

Buy Cannabis Seeds Online

Whether you are growing pot for personal use or for income, it is crucial to give your plants the best start in life possible. Just as with animals and children, healthy beginnings will encourage rapid, strong growth. You have two basic options for growing your own cannabis: start with seeds or use clones. If you choose the seed route, you will want to know the best way to germinate marijuana seeds. Experimenting with marijuana germination is your best bet for determining what’s right for you, since even seasoned growers often argue about the best methods for germinating marijuana seeds. And maybe you have been using trial and error but ended up thinking, “Why won’t my marijuana seeds germinate?”” Truth is, you’ve likely been making some mistakes without knowing it. You can increase your results, although some seeds inevitably will be duds. No one can attain 100% germination, but there is room for improvement regardless. DripWorks is happy to provide this primer on how to germinate marijuana seeds fast. These methods can get you and your seeds off to a good start. Select the Right Seeds Germination simply means getting a seed to sprout a taproot, which will serve as its main root into the soil as it grows. For the best results, start with the best seeds you can afford to buy online or get from friends. Choose between indica and sativa according to your preferences for cannabis effects or the market’s demand. You will also have dozens of strains to choose from. If possible, get feminized seeds. Because female pot plants produce the bodacious bud that cannabis connoisseurs crave, starting with feminized seeds will produce more buds when the plants mature. Feminized seeds won’t provide 100% female plants, but they will greatly increase your odds from the 50-50 chances of a standard seed selection. Germination How long does it take to germinate marijuana seeds? Typically, it will take anywhere from a couple of days to up to a week to see your seeds start to turn into plants. There are five basic germination methods that are popular. With any of these methods, remember that seeds will need adequate warmth, moisture, and air to germinate properly. Generally, cannabis seeds like a temperature of 70° F to 90° F for sprouting. Paper Towels The paper towel method is a favorite for many home growers. Simply take two pieces of paper towel. Moisten them with water. Then place your pot seeds in between the two layers of moist paper towels. Put a plate or other object under the bottom towel to prevent moisture damage and another over the top towel to keep the seeds in a dark space. When you see the white taproot emerge from your seeds, they will be ready to transplant. Make sure to plant them taproot down. Water Soaking Lots of folks like this simple, direct method. Simply soak your seeds overnight in a glass of lukewarm water. The next day, plant them directly in the ground, containers or wherever you plan to grow them. Direct Planting This is an even more natural method than water soaking. Just plant your seeds 1/2 inch to one inch deep in soil or another medium that has been moistened. A key benefit of this technique is that your seedlings won’t be subject to transplant shock. Because they have grown up in their surroundings, they will have acclimated to them. Jiffy Pots Some folks like to germinate their seeds in Jiffy Pots. You can buy these at nurseries and other places as little round disks. When you are ready to plant, just add water. They will expand into little individual soil pots you can use as a growing medium. Plant a seed or two in each pot, making sure to keep the pots moist. Once the plants sprout, you can transplant them in their Jiffy Pot to a container or to a raised bed or garden plot. Germination Station Also known as seed starters, germination stations are like mini greenhouses. They include a tray filled with soil and a heat pad underneath to keep the soil warm. A clear plastic cover on the top keeps the warmth in. You can make one of these at home or purchase one inexpensively at your local nursery or online. Simply plant your pot seeds in the growing medium and let them grow. When they are big enough, transplant them to a place where they will grow to maturity and harvest. To keep your crop growing well, check out other guides from our cannabis blog. The difinitive guide to germinating cannabis marijuana seeds from AmsterdamSeedSupply. Much controversy surrounds the raising of cannabis seed. Many first time growers are bombarded with advice, often conflicting, on how exactly this should be done. Marijuana | MMJ | Weed

How to Germinate Marijuana Seeds

Whether you are growing pot for personal use or for income, it is crucial to give your plants the best start in life possible. Just as with animals and children, healthy beginnings will encourage rapid, strong growth. You have two basic options for growing your own cannabis: start with seeds or use clones.

If you choose the seed route, you will want to know the best way to germinate marijuana seeds. Experimenting with marijuana germination is your best bet for determining what’s right for you, since even seasoned growers often argue about the best methods for germinating marijuana seeds.

See also  Cannabis Seeds For Sale Portland

And maybe you have been using trial and error but ended up thinking, “Why won’t my marijuana seeds germinate?”” Truth is, you’ve likely been making some mistakes without knowing it. You can increase your results, although some seeds inevitably will be duds. No one can attain 100% germination, but there is room for improvement regardless.

DripWorks is happy to provide this primer on how to germinate marijuana seeds fast. These methods can get you and your seeds off to a good start.

Select the Right Seeds

Germination simply means getting a seed to sprout a taproot, which will serve as its main root into the soil as it grows. For the best results, start with the best seeds you can afford to buy online or get from friends.

Choose between indica and sativa according to your preferences for cannabis effects or the market’s demand. You will also have dozens of strains to choose from.

If possible, get feminized seeds. Because female pot plants produce the bodacious bud that cannabis connoisseurs crave, starting with feminized seeds will produce more buds when the plants mature. Feminized seeds won’t provide 100% female plants, but they will greatly increase your odds from the 50-50 chances of a standard seed selection.

Germination

How long does it take to germinate marijuana seeds? Typically, it will take anywhere from a couple of days to up to a week to see your seeds start to turn into plants.

There are five basic germination methods that are popular. With any of these methods, remember that seeds will need adequate warmth, moisture, and air to germinate properly. Generally, cannabis seeds like a temperature of 70° F to 90° F for sprouting.

Paper Towels

The paper towel method is a favorite for many home growers. Simply take two pieces of paper towel. Moisten them with water. Then place your pot seeds in between the two layers of moist paper towels.

Put a plate or other object under the bottom towel to prevent moisture damage and another over the top towel to keep the seeds in a dark space. When you see the white taproot emerge from your seeds, they will be ready to transplant. Make sure to plant them taproot down.

Water Soaking

Lots of folks like this simple, direct method. Simply soak your seeds overnight in a glass of lukewarm water. The next day, plant them directly in the ground, containers or wherever you plan to grow them.

Direct Planting

This is an even more natural method than water soaking. Just plant your seeds 1/2 inch to one inch deep in soil or another medium that has been moistened. A key benefit of this technique is that your seedlings won’t be subject to transplant shock. Because they have grown up in their surroundings, they will have acclimated to them.

Jiffy Pots

Some folks like to germinate their seeds in Jiffy Pots. You can buy these at nurseries and other places as little round disks.

When you are ready to plant, just add water. They will expand into little individual soil pots you can use as a growing medium.

Plant a seed or two in each pot, making sure to keep the pots moist. Once the plants sprout, you can transplant them in their Jiffy Pot to a container or to a raised bed or garden plot.

Germination Station

Also known as seed starters, germination stations are like mini greenhouses. They include a tray filled with soil and a heat pad underneath to keep the soil warm.

A clear plastic cover on the top keeps the warmth in. You can make one of these at home or purchase one inexpensively at your local nursery or online.

Simply plant your pot seeds in the growing medium and let them grow. When they are big enough, transplant them to a place where they will grow to maturity and harvest. To keep your crop growing well, check out other guides from our cannabis blog.

Germinating Cannabis Marijuana Seeds

Much controversy surrounds the raising of cannabis seed. Many first time growers are bombarded with advice, often conflicting, on how exactly this should be done; however, it need not be such a complicated task. Cannabis seed is simple to grow, and if fresh, 90-100% germination rates are not unusual.

The ‘Kiwiland Method’ for raising seed, has been developed from professional horticultural practices used the world over. We use it because it works, and it’s simple.

Table of contents

Needed equipment

The list below is standard equipment recommended by Kiwiseeds and assumes you already have the necessary grow space and lighting set up. If you haven’t already got your equipment you can buy that online at https://www.kiwiland.com/

1. Propagator with bottom heat or
2. Heat pad + seed-tray
3. Thermostat controller
4. Soil thermometer
5. Perlite

6. Large jiffy pots + seed-raising mix or
7. Rockwool starter blocks
8. Fine sprayer
9. Identification labels

Perlite preparation

Wet thoroughly enough perlite to cover the bottom
of the propagator approximately 2cm deep. Plug the propagator, or heat pad, into the thermostat controller, plug the controller into the power and set for 23 C. Place the heat-sensing probe into the wet perlite just beneath where the seedlings roots will be. If using a heating pad lay it out beneath the propagator tray.

See also  Best Weed Seeds To Grow Outdoors

Jiffy pots preparation

Pre-soak the jiffy pots in warm water then fill them to the top with seed-raising mix making sure to take out any bigger pieces that may obstruct the young shoot as it emerges.

(This can also be done with the help of a coarse sieve if you like.)

Completely saturate the jiffy-pots and their contents, but allow them to drain well. Do this carefully so as not to wash the fine soil away. Top them up and repeat if the mix has sunken too much. It’s important to have them as full as possible to give the young roots plenty of room to grow for the week or two until they are potted on, and, because having a greater volume of the mix in the pots means they take longer to dry out under the warm lamp.

With a thin pointed object such as a pencil, make a small hole in the center of each jiffy-pot about twice the depth that the seed is long (This varies with strain, but 5-8mm deep should be sufficient. Often the mistake is made of planting seeds too deeply, and they rot before they see the light of day. To ensure this doesn’t happen, never sow seeds deeper than 1cm). If sowing more than one variety remember to prepare identification labels in advance and label them as you go to prevent mix-ups.

Put the cannabis seeds in Jiffy pots

Sow seeds directly into the holes, and cover with a little of the moist seed-raising mix from around it with the help of the pencil. Use a little more fine mix if needed. Some growers have the patience to sow seeds a certain way up, and this can be beneficial, especially with big seeds. If this is done place the seed, point up, ensuring the root can travel downwards with ease.

Watering the seeds

Using the mister bottle, spray the freshly covered seeds until the mix is damp. Don’t pour water onto the pots as this can wash away the mix and expose seeds.

Transfer jiffy-pots into pre-warmed propagator tray, and settle them in making sure the wet perlite surrounds the pots, getting right up between them. This ensures the pots stay moist until well after the seeds germinate, protecting the young roots from drying out.

Lighting, temperature & humidity

Set the tray under either fluorescent lighting or a low-wattage H.P.S. to keep the newly planted seeds warm. At this stage no light is necessary but warmth is important, and low light provides this without drying the pots out. An air temp of 20-22C is ideal, a degree or two lower than the soil temp (around 23C). Humidity if regulated can be set for around 60%.

Growing the cannabis seedlings

As soon as the seedlings have germinated they need light. The food store supplied by the seed itself has all but been used up, and the plant needs light to photosynthesize and grow.

When growing marijuana in the vegetative stage you may choose how long you wish to keep the lights on, as long as it’s 18 hours or more. The advantages are that plants will grow faster with 24 hours light, and a constant temperature is easier to maintain this way, something hugely beneficial to young seedlings. Disadvantages are that you’ll need to water more, of course, your lamps and ballasts don’t get a break, and the electricity bill increases.

Some people advise keeping young seedlings under fluorescent lighting for a while but this doesn’t provide them with the correct spectrum for photosynthesis. It is best in our opinion to place seedlings directly under low wattage H.P.S lamps, 150/250/ or 400 watts, at a good distance away.
Once the plants are a few days growing they need to be moved closer to the lamps in order to prevent stretching. Move them as close to the lamp as the tops of many plants would be comfortable. (30-60cm depending on the lamp size.)

Make sure a breeze (oscillating fan) is blowing over the young plants, primarily so they don’t overheat, but furthermore to help strengthen delicate stems by stimulating cellulose production. Spindly stems cannot support heavy flowering growth. The importance of your internal air circulation cannot be stressed enough. It will exercise your plants and make them grow stronger while reducing many hazards that could ruin your crop.

Now that the plants have strong light they require more water and nutrients as well. A light organic feed or nutrient solution starting with an E.C of no more than .8 (with the water already at .5) can be sprayed directly on the plant and watered into the soil. The seed-raising mix contains no nutrients so within a few days the plants will be hungry.

Young seedlings love humidity, and a constant 60-70% is ideal at this stage. Use a cheap mister bottle, and spray regularly freshwater (ph- 6.5-7.5) over the leaves. This increases humidity, and washes dirt and dust off the leaf surface, unclogging stomata and enabling the plant to breathe properly. In natural conditions, the rain would do this for us.

See also  Cannabis Seed Breeders

Problems raising seedlings

Problems can occur during germination. Here is a list of some of the more common reasons why your seeds may not be doing so well.

Too wet
Seeds need to be damp, not wet for germination. Excess water prevents oxygen from getting to the seed. Poorly drained soils may also cause soil fungus diseases. The condition of wet soils may be improved by adding perlite, which will aerate your soil. Make sure any trays or pots you use have holes in the bottom to let the excess water drain.

Too dry
A certain amount of water is essential for germination, so maintaining constant soil moisture during the germination period is vital. Spray the soil surface with a fine mist, or cover containers with glass or a damp cloth to prevent your soil drying out. Make sure you remove the cloth once the shoot emerges.

Too hot
High temperatures result in excessive soil desiccation and injury to seeds and seedlings. We recommend a constant temp of 20-25 degrees.

Too cold
Cold temperatures can kill seedlings and prevent germination. Cool temperatures can result in slow, uneven germination, and attack by soil diseases. If growing outside, you may want to start your seeds indoors, before outdoor planting. Make sure planting is not done too early when there is still a chance of frost.

Too shallow
If you sow your seeds too shallowly the seeds can dry out. A depth of between .5 to 1cm is about right.

Soil too firm
Making your soil mix too firm can prevent oxygen from getting to your seeds and drainage can be affected. Pat freshly covered seeds lightly with your fingers.

Soil too loose
Soil that’s too loose results in too much air surrounding the seed. Seeds planted in this manner will not absorb moisture properly, and it’s likely they’ll dry out. Cover freshly sown seeds with fine mix and pat down lightly with your fingers.

Soil fungus
Seeds may rot, or the young seedlings may fall over. Overwatering, poor drainage and lack of aeration will increase the likelihood of this occurring. Plant seeds in sterilized potting mix, and make sure your containers are clean.

Non-viable seed
If your seeds have not been stored correctly they can deteriorate. Look for darker seeds that are a little bigger, without cracks or chips. Any seeds that look shriveled or wrinkled should be discarded, as this means the seed has dehydrated and is dead.

How To Germinate Marijuana Seeds With Jiffy Pellets

My favorite way to germinate marijuana seeds is with jiffy pellets. I currently have a 100% germination rate using jiffy pellets!

Using jiffy pellets is a very safe and easy way to germinate your marijuana seeds. There are only a few steps, which I will go over here in detail.

You can find jiffy pellets and almost every garden store, or you can order them here. (Of course I always order them online because I am a lazy stoner.)

They come dry and compressed. We will need to add water to them so they expand and become usable for planting.

You should NOT soak the jiffy pellets. They will become too wet and if you squeeze them out they can become unstable.

Instead, we need to slowly pour 1 cup of water over them. Then wait several minutes until they expand.

Once the jiffy pellets have expanded, we can plant our marijuana seeds.

It is very important to only put one marijuana seed per jiffy pellet.

Take one of your seeds and put it about .5″ deep in the pellet. It does not matter which way the seed is turned. Cover it with some of the top soil.

If you have a jiffy pellet kit with a dome, place that over the top. Marijuana seeds need a relatively humid environment to germinate, and the dome will help with that. Just make sure to take it off a few times per day so the seeds can get fresh air.

It will take the seeds a few days to germinate. It is very important to make sure that they jiffy pellets do not dry out during this time.

The ideal temperature marijuana seed germination is 70°-78°, so try to keep the jiffy pellets in an environment that can accommodate that.

Anywhere from 2-8 days later, you will see your marijuana seeds begin to pop their heads out of the jiffy pellets. This will not happen to all your seeds at one time, so be patient and do not mess with the ones that need a little extra time.

Once the seeds have broken through the soil, they will need to be placed on either a 24/0 or 16/8 light schedule to start the germination phase.

Good luck with germinating your marijuana seeds with jiffy pellets! If you have any questions, please feel free to ask in the comments below.

How useful was this post?

Click on a star to rate it!

Average rating 5 / 5. Vote count: 1

No votes so far! Be the first to rate this post.